CCL fails ?

General forum for the UK Keratoconus and self-help group members.

Click on the forum name, General Discussion Forum, above.

Moderators: Anne Klepacz, John Smith, Sweet

chriser00
Contributor
Contributor
Posts: 13
Joined: Fri 14 Nov 2008 11:22 pm
Keratoconus: Yes, I have KC

CCL fails ?

Postby chriser00 » Thu 09 Jul 2009 8:07 pm

Hi

I have CCL done: 6 months ago in right eye and 3 months ago in left eye/

Comparing results of examination 6 months ago (before first CCL) and now:

Left eye: cornea thickness decreases from 572 nm to 566 nm. K1 increases from 43.4D to 43.5D

Right eye - cornea thickness decreases from 546 nm to 536 nm. K1 inncreases from 45.1D to 45.4D.

Was that your case too?

I had hope that CCL stops progresion. Now I'm wondering whether cornea will be still decreasing and K1 increasing :(

User avatar
Andrew MacLean
Moderator
Moderator
Posts: 7703
Joined: Thu 15 Jan 2004 8:01 pm
Keratoconus: Yes, I have KC
Vision: Other
Location: Scotland

Re: CCL fails ?

Postby Andrew MacLean » Fri 10 Jul 2009 6:22 am

We all go into treatments with the hope that we will see immediate beneficial results, and we would need to be super-human not to experience disappointment if our expectations are not fulfilled.

What is your clinic saying about the situation?

Andrew
Andrew MacLean

User avatar
GarethB
Ambassador
Ambassador
Posts: 4916
Joined: Sat 21 Aug 2004 3:31 pm
Keratoconus: Yes, I have KC
Vision: Graft(s) and contact lenses
Location: Warwickshire

Re: CCL fails ?

Postby GarethB » Fri 10 Jul 2009 8:00 am

I would also like to know what the tolerances are of the machine used to take the measurements?

There are only two readings but if you look at the maximum thickness change of -10nm (I think this should be microns and not nanometers) and the mean of the thinnest corena results, the change is less than 2% which for the scientific equipment I use to measure particle size in microns is within normal expereimental error and equipment tolerances.

As to K readings I am unsure on exactly how the numbering works to calculate the difference but if we assume it is like thickness the change is less than 1% so may well be within the instrument tolerances.

On a day to day basis you can get changes in the eye and it could be that on the day you had the measurements taken you had a bit of dry eye, slightly dehydrated and that may well affect the results.

To be honest you need to discuss this in more detail with your consultant and understand what factors can affect the readings obtained from your own health and the measuring abilities of the equipment used to name but 2 factors.

I have heard the cornea bounces around for some time post CXL, don't know if this is just shape or thickness, the only way to tell I think is by having regular measurments taken
Gareth

chriser00
Contributor
Contributor
Posts: 13
Joined: Fri 14 Nov 2008 11:22 pm
Keratoconus: Yes, I have KC

Re: CCL fails ?

Postby chriser00 » Fri 10 Jul 2009 8:58 am

I've got an e-mail from my doctor not to worry as every examinaiton may be affected by little mistake and the differences are very small.

We will se. I'm going to have next examinaiton on December, so we will se :)

User avatar
Andrew MacLean
Moderator
Moderator
Posts: 7703
Joined: Thu 15 Jan 2004 8:01 pm
Keratoconus: Yes, I have KC
Vision: Other
Location: Scotland

Re: CCL fails ?

Postby Andrew MacLean » Fri 10 Jul 2009 9:23 am

chriser00

All the best in december. You will be in our thoughts.

Andrew
Andrew MacLean


Return to “General Discussion Forum”

Who is online

Users browsing this forum: No registered users and 40 guests